IEC 60601-1-2 is an international standard for medical implements which, as a supplementary standard, focuses primarily on the safety aspect of the equipment and specifies requirements for electromagnetic compatibility. The standard is identical to the German DIN standard EN 60601-1-2, which was slightly modified in the third edition from 2007 and over the years.
In 2014, the fourth edition of IEC 60601-1-2 was introduced with some major changes that have not yet been implemented as a European standard. To comply with the supplementary standard, there are no prescribed evaluation criteria, which would be hardly feasible due to the variety of medical equipment with their individual characteristics and features.
Manufacturers of medical devices are therefore required to specify the correct functioning of the device in question and to specify deviations and tolerances according to professional risk management in order to implement the international standard appropriately.
Emissions Tests | Key Facts |
---|---|
Radiated Emissions Measurement in Semi-Anechoic Chamber | fulfills: NSA acc. to CISPR 16-1-4 chapter 5.7 within 30 MHz to 1 GHz, 3 m and 10 m test distances, test volume of up to 4 m diameter; with additional floor absorbers requirements for free space emission tests up to 18 GHz, requirements acc. to CISPR 16-1-4 chapter 8 for 1 GHz to 6 GHz emissions measurements in 3 m distance, test volume of 4 m diameter / 2.3 m height |
Conducted Emissions Measurement in Semi-Anechoic Chamber | (10) 150 kHz to 30 MHz acc. to CISPR 16-1-2 on AC and DC supply lines up 400 (700) V / 400 A shielded and unshielded signal lines |
The adequate implementation of the test criteria according to IEC 60601-1-2 essentially depends on the field of application of the medical devices. Thus, a distinction is made between their use in the home environment of patients or the use in medical facilities, whereby the safety risks in the private environment is higher due to theatening improper use. It is also necessary to specify upper limits for the electromagnetic radiation of the equipment, also here more stringent requirements for the private area of application have to be defined. This aspect also includes susceptibility to other sources of interference such as mobile devices.
IEC 60601-1-2 also stipulates various ESD tests to limit the contact and air discharge of medical equipment. For basic safety in dealing with the medical device, clear guidelines are given regarding the partial or complete destruction of the device. In case of the implementation of the fourth edition of IEC 60601-1-2 at European and German level, additional to the individual test aspects, stricter requirements will be established for the correct preparation of the test report. For example, by means of standardized documents and easy-to-understand texts.